集成電路 | 輸入/輸出集成電路
I/O 電路

 iC-GD Data sheet.pdf

iC-GD

通用輸入/輸出接口 - (新)

Features

  • Two channels, each configurable as input or output

  • Low-side and high-side switches with up to 500 mA per channel, current limitation, current measurement, status messages, cable break detection, freewheeling diode, reverse polarity protection, optional parallel connection of both channels

  • Output of ±10 V or 0/4...20 mA with 14-bit resolution

  • Measurement of ±10 V, ±1 V, ±100 mV, ±10 mV, ±20 mA or 4...20 mA with 16-bit resolution

  • Input for Pt 100, Pt 1000 temperature sensors

  • Multi-function 32-bit counter

  • Digital output with pulse-width modulation option

  • Internal temperature measurement with 1 K resolution

  • SPI interface

  • Calibration and configuration by external EEPROM via serial interface

  • Error message at overtemperature, overload and undervoltage

  • Shutdown of the outputs in case of error


Applications

  • SPS control system

  • Data acquisition

  • Sensor interfaces


 iC-GF Data sheet.pdf

iC-GF

IO-Link 收發器用于 IO-Link Slave

Features

  • IO-Link compliant slave transceiver

  • Dual channel current-limited switches, configurable for high-side, low-side and push-pull operation with tristate function

  • Configuration via pins or SPI interface

  • Protection against reverse polarity

  • Output current of up to 150 mA per channel

  • The channels can be inverted for antivalent output

  • Sensor communication request function (IO-Link wake-up)

  • Wide supply voltage range of 9 to 30 V

  • Sensor parametrisation via a feedback channel

  • Error detection with hysteresis and driver shutdown for excess temperature, overload and undervoltage

  • Switching converters and linear regulators for 3.3/5 V voltage generation


Applications

  • IO-Link slaves and IO-Link sensor interface

  • Digital sensors

  • Light barriers

  • Proximity switches



 iC-JRX Data sheet.pdf

iC-JRX

2x4 雙向24V高端驅動器, 帶單片機接口

Features

  • 2 × 4 bidirectional 24 V input/output stages

  • I/O mode programmable in 4-bit blocks

  • Guaranteed high-side driving capability of 100 mAdc and 500 mApeak for pulse load

  • Short-circuit-proof drivers with high dielectric strength

  • Low saturation voltage of 0.6 V/100 mA and 2.0 V/500 mA

  • Integrated flyback circuits

  • Programmable PWM function

  • Digital input filters with filtering times externally adjustable

  • Supply voltage and two-stage temperature monitoring


Applications

  • Dual quad high-side driver as a bidirectional μP interface with digital filtering for industrial 24 V applications




 iC-JX Data sheet.pdf

iC-JX

4x4 雙向24V高端驅動器, 帶單片機負載診斷接口

Features

  • 16 bidirectional input/output stages at 24 V

  • Input/output mode programmable in 4-channel blocks

  • Short-circuit-proof high-side drivers with diagnosis function

  • 500 mA pulse and 150 mA permanent load driving capability

  • Active flyback circuit

  • Load diagnosis for driver current, output voltage and impedance (cable fractures, resistance and short circuits)

  • 10-bit A/D converter for the generation of diagnosis measurement values

  • Safety features (voltage monitor, temperature sensor with warning and shutdown features, power output enable pin)

  • Variable digital filters for the debouncing of I/O signals

  • Fast 8-bit parallel or serial SPI-compatible μC interface permits use in buses

  • Logic supply from 3 V upwards


Applications

  • Industrial 24 V applications

  • Lamp switches with diagnostic features

  • Inductive load driver circuits for relays and valves


 iC-MD Data sheet.pdf

iC-MD

48位正交信號計數器, 帶RS422接收器和SPI/BiSS接口

Features

  • Counter resolutions: 16, 24, 32 and 48 bit

  • Counter resolutions: 16, 24, 32 and 48 bit

  • High count frequency of up to 40 MHz

  • Evaluation of distance-coded reference marks

  • Cascading/bus capable via SPI and BiSS C Interface

  • RS422, TTL, CMOS, LVDS input signals

  • Two actuator output signals

  • Operation from 3.3 V to 5 V

  • Operation modes: 1-channel ABZ inputs (TTL/RS422/LVDS), 2-channels ABZ inputs (TTL), 3-channels AB inputs (TTL)

  • Sub-system power switch offers reverse polarity protection for the overall system

  • Loss-of-signal indicator


Applications

  • PLC interface to linear scales and rotary encoders

  • Motion control

  • Quadrature encoder interfacing and processing



 iC-VRV Data sheet.pdf

iC-VRV

2x4 24V低端驅動器, 帶輸入/輸出功能和單片機接口

Features

  • 2 × 4 bidirectional 24 V input/output stages

  • I/O mode programmable in 4-bit blocks

  • Output current 100 mAdc and 500 mApeak for pulse load

  • Short-circuit protection

  • Saturation voltage of 0.4 V (1.5 V/500 mA)

  • Integrated freewheeling diodes

  • Output voltage of up to 48 V

  • Digital input filters with filtering times externally adjustable

  • Thermal shutdown, low voltage detection


Applications

  • Dual quad low-side driver as a bidirectional μP interface with digital filtering for industrial 24 V applications



接口 iCs . Biss

 iC-MD3 Data sheet.pdf

iC-MB3

BiSS接口Master主機, 1通道/3從機, SPI/并行控制器接口

Features

  • Bidirectional BiSS communication with up to 3 slaves

  • Supports BiSS C unidirectional, BiSS B, SSI and extended SSI

  • Synchronous acquisition with data rates up to 10 Mbit/s

  • BiSS B slave register operations

  • Automatic line delay compensation

  • Data lengths of up to 64 bit for sensor data per slave

  • CRC verification with up to 8 bits per slave

  • SPI or parallel interface to host e.g. microcontroller

  • Single 3 V to 5 V supply


Applications

  • BiSS B, BiSS C unidirectional, SSI sensor communication master

  • Device communication in multi-sensor sytems

  • Position acquisition with encoders

  • Drives and motor-feedback systems



 iC-MB4 Data sheet.pdf

iC-MB4

BiSS接口主機, 2通道/8從機, RS422收發器, 雙SPI接口

Features

  • Bidirectional BiSS communication with up to 8 slaves

  • Supports BiSS C, BiSS B, SSI and extended SSI

  • Synchronous acquisition with data rates up to 10 Mbit/s

  • Configurable interface with TTL, CMOS, RS422 or LVDS

  • Slave register operations during cyclic data transfers

  • Automatic line delay compensation

  • Data lengths of up to 64 bit for sensor data per slave

  • CRC verification with up to 16 bits per slave

  • 64 bytes memory for bidirectional register access

  • SPI or parallel interface to host e.g. microcontroller

  • Single 3 V to 5 V supply


Applications

  • Device communication in multi-sensor sytems

  • Position acquisition with encoders

  • Drives and motor-feedback systems


91超碰国产在线观看