集成電路 | 驅動器iCs
輸出級芯片

 DN.jpg

iC-DN

200mA 低端開關用于4V 到 36V 輸入/輸出去耦合

Features

  • 36 V lowside switch/level shifter

  • Decoupling of input and output voltages (SOT23-6L) permits control by 5 V logic

  • 200 mA of output current

  • Short-circuit protected

  • Output with an active freewheeling circuit

  • On-chip over-temperature protection

  • 4 to 36 V input voltage range

  • Input with hysteresis

  • Wide temperature range of -40 to 120 °C


Applications

  • Lowside switch for industrial applications, such as relays, inductive proximity sensors and light barriers



 DP.pdf

iC-DP

200 mA 高端開關和電平轉換用于4V到36V 輸入/輸出去耦合

Features

  • 36 V highside switch/level shifter

  • P-channel output driver without charge pump for short activation time

  • Decoupling of input and output voltages (SOT23-6L) permits control by 5 V logic

  • 200 mA of output current

  • Short-circuit protected

  • Output with an active freewheeling circuit

  • On-chip over-temperature protection

  • 4 to 36 V input voltage range

  • Input with hysteresis

  • Wide temperature range of -40 to 120 °C


Applications

  • Highside switch for industrial applications, such as relays, inductive proximity sensors and light barriers


 DX.pdf

iC-DX

數字傳感器輸出驅動器

Features

  • Configurable high-side, low-side and push-pull operation

  • Current limited output (< 450 mA)

  • Reverse polarity protection

  • 150 mA output current

  • Wide supply voltage range from 8 to 30 V

  • Shutdown with overtemperature

  • Integrated free-wheeling diode for inductive loads

  • Sensor supply voltage output of 5 V, 10 mA


Applications

  • Digital sensors

  • Light barriers

  • Proximity switches


 DX3.pdf

iC-DX3

數字傳感器輸出驅動器

Features

  • Configurable high-side, low-side and push-pull operation

  • Current limited output (< 450 mA)

  • Reverse polarity protection

  • 150 mA output current

  • Wide supply voltage range from 8 to 30 V

  • 5 μs input filter for spike suppression

  • Shutdown with overtemperature

  • Integrated free-wheeling diode for inductive loads

  • Sensor supply voltage output of 3.3 V, 10 mA


Applications

  • Digital sensors

  • Light barriers

  • Proximity switches


 DXC.pdf

iC-DXC

數字傳感器輸出驅動器, 帶反饋通道

Features      

  • Configurable high-side, low-side and push-pull operation

  • Current limited output (< 450 mA)

  • Reverse polarity protection

  • 200 mA output current

  • 5 μs input filter for spike suppression

  • I/O-Link compliant

  • Wide supply voltage range from 8 to 30 V

  • Shutdown with overtemperature

  • Integrated free-wheeling diode for inductive loads

  • Sensor supply voltage output of 5 V, 10 mA


Applications

  • Digital sensors

  • Light barriers

  • Proximity switches


 Mfl.pdf

iC-MFL, iC-MFLT

8通道/12通道失效保護邏輯 N-FET 驅動器

Features

  • 8-/12-fold level shift to 5 V output voltage

  • Secure low-state of the output with single faults

  • Schmitt Trigger inputs with two-stage pull-down current for enhanced noise immunity with limited power dissipation

  • Inputs TTL and CMOS compatible (1.8 to 3.3 to 5 V)

  • Current limited and short-circuit proof push-pull outputs

  • Push-pull current source to drive FET transistors

  • Voltage-proof outputs up to 18 V (pulsed)

  • Ground and supply voltage monitor

  • iC-MFL QFN24 is qualified for typical SIL/ASIL applications according to AEC Q100


Applications      

  • Operation of 5 V Logic Level N-FETs out of 3.3 V systems


 Mfn.pdf

iC-MFN

8通道失效保護 N-FET 驅動器, 電平轉換高達40V

Features

  • 8-fold level shift up to 40 V output voltage

  • Safe low output state with single errors

  • Schmitt Trigger inputs with two-stage pull-down current for enhanced noise immunity with limited power dissipation

  • Inputs TTL and CMOS compatible (1.8 to 3.3 to 5 V)

  • Input Voltage up to 40 V

  • Current limited and short-circuit proof push-pull outputs

  • Level shift configurable to 5 V, 10 V or supply voltage

  • Push-pull current source to drive FET transistors

  • Ground and supply voltage monitor


Applications      

  • Operation of N-FETs from 1.8 V, 3.3 V or 5 V systems


 Mfp.pdf

iC-MFP

8通道失效保護 P-FET 驅動器, 電平轉換高達40V

Features

  • 8-fold level shift up to 40 V output voltage

  • Safe high output state with single errors

  • Schmitt Trigger inputs with two-stage pull-down current for enhanced noise immunity with limited power dissipation

  • Inputs TTL and CMOS compatible

  • Input Voltage up to 40 V

  • Current limited and short-circuit proof push-pull outputs

  • Level shift configurable to 5 V, 10 V or supply voltage

  • Push-pull current source to drive FET transistors

  • Ground and supply voltage monitor


Applications

  • Operation of P-FETs from 1.8 V, 3.3 V or 5 V systems


24V 和 5V 線驅動器

 DL 規格書.pdf

iC-DL

3通道綜合阻抗適應差分線驅動器

Features      

  • 6 current-limited and short-circuit-proof push-pull drivers

  • Differential 3-channel operation

  • Power supply range from 4 to 40 V

  • Integrated 30 to 140 Ohm line adaptation

  • Low output saturation voltage

  • Compatible with TIA/EIA standard RS-422

  • Tristate switching enables use in buses

  • Short switching times and high slew rates

  • Schmitt trigger inputs compatible with TTL and CMOS levels, voltage-proof up to 40 V

  • Thermal shutdown


Applications      

  • 24 V control engineering

  • Line driver in a PLC environment

  • Linear and rotary encoders

  • MR sensor systems


 HD2.pdf

iC-HD2

4通道差分線驅動器, 引腳兼容xx2068

Features      

  • Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2MHz

  • Pin-compatible with xx2068

  • Integrated line adaptation for high signal quality at 24V

  • Moderate slew rate reduces EMI

  • High driving capability of typically 200mA at 24V

  • Output saturation of just 0.3 V at 40 mAdc

  • Tristate function with excessive temperature

  • Error messaging with excessive temperature and undervoltage

  • TTL-/CMOS-compatible Schmitt trigger inputs, voltage-proof to 40 V

  • Tristate function for bus applications

  • Integrated 5 V voltage regulator for 5mA

  • 4.5 to 35 V single supply operation with low static power dissipation


Applications      

  • Line drivers for 24 V control engineering

  • Linear scales and encoders

  • Sensor systems



 HD7.pdf

iC-HD7

4通道差分線驅動器, 引腳兼容xx7272和26LS31

Features      

  • Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2MHz

  • Pin-compatibel with 26LS31, xx7272

  • Integrated line adaptation for high signal quality at 24V

  • Moderate slew rate reduces EMI

  • High driving capability of typically 200mA at 24V

  • Output saturation of just 0.3 V at 40 mAdc

  • Excessive temperature shutdown

  • TTL-/CMOS-compatible Schmitt trigger inputs, voltage-proof to 40 V

  • Tristate function for bus applications

  • 4.5 to 35 V single supply operation with low static power dissipation


Applications

  • Line drivers for 24 V control engineering

  • Linear scales and encoders

  • Sensor systems


 iC-HE_Data sheet.pdf

iC-HE

3通道差分線驅動器

Features

  • Complementary short-circuit-proof push-pull driver stages for RS422 and 24 V applications up to 2MHz

  • SO14N package pin-compatible to ET9600

  • Integrated line adaptation for high signal quality at 24V

  • Moderate slew rate reduces EMI

  • High driving capability of typically 200mA at 24V

  • Output saturation of just 0.3 V at 40 mAdc

  • Tristate function with excessive temperature

  • TTL-/CMOS-compatible Schmitt trigger inputs, voltage-proof to 40 V

  • Tristate function for bus applications

  • 50 mA LED driver with ISET input for current control

  • 4.5 to 35 V single supply operation with low static power dissipation


Applications

  • Line drivers for 24 V control engineering

  • Linear scales and encoders

  • Sensor systems



 iC-HF Data sheet.pdf

iC-HF

6通道 RS-422 Encoder Link (編碼器連接) 線驅動器/接收器

Features

  • Versatile 3+3 channel RS-422 line driver/receiver

  • Pin-configured as driver (6x) or driver/receiver (3x/3x or 4x/2x)

  • Supports BiSS bus structure and BiSS bus loopback

  • Unique Encoder Link mode: analog switches to bridge 9 lines

  • Differential short-circuit-proof push-pull outputs

  • Driving capability of 30 mA typ. at 3 V

  • Reduced EMI due to output current limitation

  • Output shutdown with undervoltage and overtemperature

  • Suits various line impedances, allows 100 Ohm termination

  • Up to 10 MHz input/output frequency

  • Reverse-polarity-proof operation from 3.0 V to 5.5 V


Applications

  • Differential cable driver

  • Motion control encoders

  • Control engineering

  • Sensor bus structures with BiSS



 iC-HX Data sheet.pdf

iC-HX

3通道差分線驅動器, 低耗功能

Features      

  • 6 current-limited and short-circuit-proof push-pull drivers

  • Differential 3-channel operation

  • Power supply range from 4 to 40 V

  • Integrated 30 to 140 Ohm line adaptation

  • 200 mA output current (at VB = 24 V)

  • Low output saturation voltage (< 0.4 V at 30 mA)

  • Compatible with TIA/EIA standard RS-422

  • Tristate switching enables use in buses

  • Short switching times and high slew rates

  • Schmitt trigger inputs compatible with TTL and CMOS levels, voltage-proof up to 40 V

  • Thermal shutdown

  • Low static power dissipation, Dynamic power dissipation reduced with iC-xSwitch


Applications

  • Line driver for 24 V control engineering

  • Linear scales and rotary encoders

  • MR sensor systems


 iC-VX Data sheet.pdf

iC-VX

3通道差分線驅動器, 24V互補輸出

Features      

  • Driver supply voltage of 4.5 to 30 V

  • Push-pull driver current-limited and short-circuit-proof

  • Programmable driving capability of 30 mA or 100 mA

  • Integrated freewheeling diodes

  • TTL-/CMOS-compatible hysteresis inputs with pull-up current sources

  • Selectable input reference level

  • Thermal shutdown


Applications      

  • Line driver for 24 V control engineering


 iC-WE Data sheet.pdf

iC-WE

3通道75Ω線驅動器用于RS422和24V應用

Features

  • Driver supply voltage of 4.5 to 30 V

  • Push-pull driver current-limited and short-circuit-proof

  • Guaranteed driving capability of 30 mA

  • Integrated cable adaptation with thermal protection

  • Tri-state and invert mode

  • TTL-/CMOS-compatible hysteresis inputs with pull-up sources

  • Meets EIA standard RS422 (with two iCs used)

  • Error output with thermal shutdown and low voltage


Applications      

  • 24 V signal transfer

  • Line driver in a PLC environment


繼電器/螺線管驅動器

 iC-DY6818 Data sheet.pdf

iC-DY6818

32位串行輸入鎖存推挽驅動器

Features      

  • Pin compatible with Allegro A6818

  • 32 bit shift register

  • Shift register with data latches and control circuitry

  • 36V output drivers with ±25 mA output current

  • Drivers shut down with over temperature

  • Error (NERR) signal with Tristate Output

  • Direct interfacing with microprocessor based systems

  • Integrated free-wheeling diode for inductive loads

  • Typical serial data input rates up to 33 MHz


Applications

  • Driving bi-stable relays

  • Peripheral power driver applications


 iC-GE Data sheet.pdf

iC-GE

PWM 繼電器/螺線管驅動器, 寬操作電壓范圍 (1 A)

PWM Relay/Solenoid Driver for a Wide Operating Voltage Range (1 A)

Features      

  • Current control for inductive actuators at 24 V (10 to 36 V)

  • High efficient current control up to 1 A

  • Switching with power saving and reduced power dissipation

  • Individual setting of energising and hold current

  • Contact conserving switching of relays synchronous to the mains

  • Monitoring of coil current, supply voltage and temperature

  • Shutdown with overtemperature and undervoltage

  • Status indication via LED or logic output

  • Fast demagnetising due to 15 V countervoltage

  • High PWM frequency with frequency spreading for low EMI

  • Energising time of 50 ms prolongable with external capacitor


Applications

  • PWM driver for inductive loads (e.g. relays, electrovalves)

  • Relay low-/high-side switch



 iC-GE100 Data sheet.pdf

iC-GE100

PWM 繼電器/螺線管驅動器 (100 mA)

Features

  • Current control for inductive actuators at 24 V (10 to 36 V)

  • High efficient current control up to 100 mA

  • Switching with power saving and reduced power dissipation

  • Individual setting of energising and hold current

  • Contact conserving switching of relays synchronous to the mains

  • Monitoring of coil current, supply voltage and temperature

  • Shutdown with overtemperature and undervoltage

  • Status indication via LED or logic output

  • Fast demagnetising due to 15 V countervoltage


Applications

  • PWM driver for inductive loads (e.g. relays, electrovalves)

  • Relay low-/high-side switch


 iC-JE Data sheet.pdf

iC-JE

節能 PWM 繼電器/螺線管驅動器

Features      

  • Reduces the power consumption of valves and relays by 50%

  • Adjustable PWM current regulation at 10 to 45 V

  • Up to 300 mA startup current, automatically reduced in hold mode

  • Coil current monitored during startup mode, detection of load breakage and voltage errors

  • LED output for status and error message

  • Active, fast coil demagnetizing

  • Shutdown with excessive temperature and low voltage


Applications

  • PWM driver for inductive loads (e.g. relays, electrovalves)

  • Relay low-/high-side switch




91超碰国产在线观看